Keep large indoor areas comfortable with the right cooler setup
Cooling big indoor areas in the summer is no easy feat. Open offices, indoor gatherings, warehouses, banquet halls, and even co-working spaces can heat up rapidly, becoming unpleasant for users. While one air cooler might be sufficient for a small room, bigger spaces require a smart and more distributed approach. Using multiple coolers is a cost-effective and energy-efficient alternative to central air conditioning, if done thoughtfully. Here are the best ways to set up multiple air coolers to keep large indoor spaces cool and comfortable all day long.
1. Map out the room dimensions and layout
Begin by evaluating the area you need to cool. Measure the square footage, consider the ceiling height, and take note of any partitions, furniture, or machinery that might obstruct airflow. Identify hot spots or areas with stagnant air. This will guide you on how many coolers to use and where to position them to provide complete coverage. Large rooms with poor air circulation will benefit from a layout plan that includes both central and corner air coolers.
2. Use high-capacity coolers
All coolers are not the same. For large spaces, go for a high-capacity cooler such as any Bajaj cooler. Coolers by Bajaj are usually known for their powerful air delivery, huge water tanks, and long running times. These are suitable for industrial, commercial, or semi-open environments. And, combining floor-standing desert coolers and tower coolers can assist in covering various zones efficiently, based on space availability and the amount of air throw needed.
3. Position coolers strategically, not symmetrically
Do not place coolers directly opposite each other, as it can cause opposing air currents and lower efficiency. Instead, position the coolers at an angle to enhance airflow circulation throughout the room. The goal is to create a smooth flow that pushes hot air out and pulls in cooler, refreshed air. Make sure high-traffic spots like workstations, reception areas, or meeting zones get direct airflow for optimum comfort.
4. Allow for cross ventilation
One of the most important steps when using multiple air coolers is to maintain ventilation. Unlike air conditioners, air coolers work best when there is good air exchange. Open a few windows, doors, or exhaust vents to allow warm air to escape and cooler air to circulate freely. Without ventilation, humidity can build up, thereby reducing cooling efficiency and causing discomfort.
5. Zone the space based on usage
Think of the area in zones. Where do people spend most of their time? Conference rooms, dining sections, and front-desk areas will need strong, more targeted cooling. On the other hand, storage corners or low-traffic zones won’t need as much airflow. Zoning distributes the coolers more efficiently and helps save energy by not overcooling underused spots.
6. Maintain all units regularly
Multiple air coolers mean more maintenance, but regular cleaning and check-ups keep your system running at peak performance. Clean dust filters, fans, and cooling pads every couple of weeks or at least once a month. Empty and refill the water tanks with clean water, and check for any calcium build-up or mould. A well-maintained cooler lasts longer, cools better, and keeps the air fresher.
Managing indoor heat does not necessarily need to be managed through costly AC units. With a little planning, multiple air coolers, especially efficient models like any Bajaj cooler, can deliver powerful, consistent cooling across even the largest spaces. Proper placement, cross-ventilation, and maintenance are the secrets to optimum performance.
